Silver nitride is an explosive chemical compound with symbol Ag3N. It is a black, metallic-looking
History
Silver nitride was formerly referred to as fulminating silver, but this can cause confusion with
silver fulminate or
silver azide, other compounds which have also been referred to by this name. The fulminate and azide compounds do not form from ammoniacal solutions of Ag
2O.
Fulminating silver was first prepared in 1788 by the French chemist Claude Louis Berthollet.
[See:
]
-
Berthollet (1788) "Procéde pour rendre la chaux d'argent fulminante" (Procedure for making fulminating silver chalk), Observations sur la physique … , 32 : 474–475.
-
Davis, Tenney L., The Chemistry of Powder And Explosives (Las Vegas, Nevada: Angriff Press, 1998), p. 401. (Originally published in 1941 and 1943 by Wiley of New York, New York.)
70 years earlier, in 1716 Johann Kunckel von Löwenstern had already described the preparation.
Properties
Silver nitride is poorly soluble in water, but decomposes in mineral acids; decomposition is explosive in concentrated acids. It also slowly decomposes in air at room temperature and explodes upon heating to 165 °C.
Hazards
Silver nitride is often produced inadvertently during experiments involving silver compounds and ammonia, leading to surprise detonations. Whether silver nitride is formed depends on the concentration of ammonia in the solution. Silver oxide in 1.52 M ammonia solution readily converts to the nitride, while silver oxide in 0.76 M solution does not form nitride.
Silver oxide can also react with dry ammonia to form Ag
3N. Silver nitride is more dangerous when dry; dry silver nitride is a contact explosive which may detonate from the slightest touch, even a falling water droplet.
It is also explosive when wet, although less so, and explosions do not propagate well in wet deposits of the compound. Because of its long-term instability, undetonated deposits of Ag
3N will lose their sensitivity over time.
Silver nitride may appear as black crystals, grains, crusts, or mirrorlike deposits on container walls. Suspected deposits may be dissolved by adding dilute ammonia or concentrated ammonium carbonate solution, removing the explosion hazard.
Other uses of the term
The name "silver nitride" is sometimes also used to describe a reflective coating consisting of alternating thin layers of silver metal and
silicon nitride. This material is not explosive, and is not a true silver nitride. It is used to coat mirrors and
.
See also
